论文部分内容阅读
我厂设有LG-3吨碱性电弧炉一座。因为电炉生产不是连续进行,而使电炉经济指标的进一步降低受到影响。最突出的反映在耗电量上。一般而言,冶炼第一炉钢(冷炉子),平均每吨钢耗电量在1000度以上。针对这一问题我们作了研究:根据我们机械铸造厂的具体情况,有铸钢也有铸铁。决定电炉配料不配入生铁,通过计算把所有应加入的钢科全部加入。加入后即通电。通电30分钟后,电
I plant with LG-3 tons of a basic electric arc furnace. Because the electric furnace production is not continuous, leaving the electric furnace to further reduce the economic indicators are affected. The most prominent reflected in the power consumption. In general, smelting the first furnace (cold stove), the average power consumption per ton of steel at 1000 degrees above. In response to this problem we have studied: According to the specific circumstances of our foundry, there are cast iron cast iron. Determine the electric furnace ingredients do not match pig iron, calculated by adding all the steel should be added to all. Join after power. After 30 minutes of electricity, electricity