论文部分内容阅读
采用单因素与多因素实验相结合的方法,获得较优的抛光工艺参数,并对各参数对抛光工艺的影响作了详细的分析说明,进而制定出较为合理、可行的抛光方法,即用PVA砂轮对不锈钢材料进行抛光的表面加工方法。
The method of combining single factor and multi-factor experiment was used to get better polishing process parameters, and the influence of each parameter on the polishing process was analyzed and explained in detail. Then a more reasonable and feasible polishing method was developed, that is PVA Grinding of stainless steel surface polishing method.