【摘 要】
：
Nd-F species in NdF3-LiF melts were studied using cryoscopic method. Liquidus temperatures of melts of various compositions were determined by differential ther
【机 构】
：
School of Materials and Metallurgy
论文部分内容阅读
Nd-F species in NdF3-LiF melts were studied using cryoscopic method. Liquidus temperatures of melts of various compositions were determined by differential thermal analysis(DTA). Based on the different model calculations, NdF4- was identified as the most likely Nd-F entity in the melts in which the mole fraction of NdF3 was lower than 20%, considering only one single Nd species in the melt, and which was formed in accordance with Temkin model or Flood model. Then, activities of different components in the melts were researched. The results show that activity of LiF decreases, and that of NdF3 increases with increasing the mole fraction of NdF3. The value of activity coefficient of NdF3 is higher than 1, and that of LiF is lower than 1.
其他文献
The synchronous acquisition system of droplet image inspection and arc electric signals were established and the droplet transition characteristics of aluminum
The influencing factors of surface alloying layer by evaporative pattern casting technology were investigated. A certain thickness alloying layer was formed on
The general behavior of micron-particles in the inner domain of porous ceramic vessel was simulated by computational fluid dynamics software in terms of samplin
Microstructural evolution and the relationship between microstructure and property during heat treatments in a new NiAl-based alloy (Ni-26.6Al-13.4Cr-8.1Co-4.3T
The phase evolution in (88%-91%)Mg-8%Sn-l%Zn-X (X=A1, Mn and/or Ce) system was analyzed via CALPHAD method and simulations were used in precise selection of the
Reactive mechanical alloying (RMA) was carried out in a planetary ball mill for the synthesis of ternary hydride Mg2FeH6 for hydrogen storage. The formation mec
Zn2+- TiO2 nanotube arrays were prepared by anodic oxidation method. The current-time curves were used to investigate their growth mechanism. Scanning electron
Three-dimensional (3D) flower-like anatase TiO2 nanostructures and flower-like titanate nanostructures were successfully synthesized via hydrothermal synthesis
The effects of precipitates on the fatigue crack growth rate of AA 7055 Al alloy subjected to different ageing treatments were investigated using transmission e
A simple electrochemical method for the in situ preparation of homogeneously dispersed gold-polyaniline core/shell nanocomposite particles with controlled size