【摘 要】
：
The effects of precipitates on the fatigue crack growth rate of AA 7055 Al alloy subjected to different ageing treatments were investigated using transmission e
【机 构】
：
Beijing Institute of Aeronautical Materials,School of Materials Science and Engineering
论文部分内容阅读
The effects of precipitates on the fatigue crack growth rate of AA 7055 Al alloy subjected to different ageing treatments were investigated using transmission electron microscope and fatigue crack growth testing. The results show that the T77 treated samples exhibit the lowest crack growth rate, while the crack growth rate of over-aged samples is the highest. In terms of the model based on the reversibility of dislocation motion within the plastic zone close to the crack tip, the improved crack growth resistance is attributed to many precipitates that are coherent with Al matrix in the under-aged and T77 treated samples. When the precipitate is coherent with the Al matrix, the larger the precipitate is, the slower the fatigue crack grows. The effects of grain boundary precipitates and precipitate free zone on the fatigue crack growth resistance are less significant than those of precipitates within grains of the alloy.
其他文献
The 3D needled C/SiC brake materials modified with graphite were prepared by a combined process of the chemical vapor infiltration, slurry infiltration and liqu
一、港口行业发展趋势伴随信息化技术的发展,电子商务企业不断发展壮大,已经影响、改变着很多传统行业的发展模式.比如,腾讯的"微信"产品对电信业的冲中击,阿里巴巴的"余额宝
The synchronous acquisition system of droplet image inspection and arc electric signals were established and the droplet transition characteristics of aluminum
The influencing factors of surface alloying layer by evaporative pattern casting technology were investigated. A certain thickness alloying layer was formed on
The general behavior of micron-particles in the inner domain of porous ceramic vessel was simulated by computational fluid dynamics software in terms of samplin
Microstructural evolution and the relationship between microstructure and property during heat treatments in a new NiAl-based alloy (Ni-26.6Al-13.4Cr-8.1Co-4.3T
The phase evolution in (88%-91%)Mg-8%Sn-l%Zn-X (X=A1, Mn and/or Ce) system was analyzed via CALPHAD method and simulations were used in precise selection of the
Reactive mechanical alloying (RMA) was carried out in a planetary ball mill for the synthesis of ternary hydride Mg2FeH6 for hydrogen storage. The formation mec
Zn2+- TiO2 nanotube arrays were prepared by anodic oxidation method. The current-time curves were used to investigate their growth mechanism. Scanning electron
Three-dimensional (3D) flower-like anatase TiO2 nanostructures and flower-like titanate nanostructures were successfully synthesized via hydrothermal synthesis