论文部分内容阅读
Microstructure, Texture, and Hardness Evolutions of Al-Mg-Si-Cu Alloy during Annealing Treatment
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
0年期
其他文献
The natural rubber/zinc disorbate composite was prepared by the in situ formation of zinc disorbate from zinc oxide and sorbic acid in natural rubber. The structure variations of fillers during mixing and vulcanization processes were studied by X-ray diff
Enhanced Ferroelectric Polarization in Laser-ablated Bi4Ti3O12 Thin Films by Controlling Preferred O
Polycrystalline Bi4Ti3O12 thin films with various fractions of a-axis, c-axis and random orientations have been grown on Pt(111)/Ti/SiO2/Si substrates by laser-ablation under different kinetic growth conditions. The relationship between the structure and
High-pressure Sintering of Boron Carbide-Titanium Diboride Composites and 1ts Densification Mechanis
A high-pressure hot-pressing process was applied to densify a commercial boron carbide-titanium diboride (B4C-TiB2) powder mixture. Nearly fully dense (98.6％) materials were obtained at 1700 ℃ under a pressure of 100 MPa. Compared to the sintering tempera
To elucidate the mechanism of brominated natural rubber (BNR),eight BNR samples with different bromine content were prepared from latex in different bromination time,and the microstructures were characterized by Fourier transform infrared spectroscopy (FT
Cement mortar with carbon fiber (CFc) and resin-cement mortar with carbon fiber (CFrc) were used as inner and outer cores of smart aggregate with Z shape, respectively, which was used as the basic perception units to prepare smart concrete aggregate with
Silicon carbide ceramics with different thicknesses/diameter ratios were prepared by using ultra-fine silicon carbide powder with the sintering additives of 1.0 wt％ boron and 1.5 wt％ carbon. The influence of thickness/diameter ratio on the microstructure
The titanium carbide phase was synthesized in laser melted-pool in situ as the reinforced particles of nickel based composite coating on Ti-6Al-4V alloy surface using the nickel and graphite blending powder by laser cladding. The microstructure investigat
Highly Efficient Synthesis of Environmentally Friendly Ag-modified TiO2 Nanoflowers to Enhance Photo
Ag-modified TiO2 nanoflowers were prepared using a two-step process. The experimental process is green and free from contamination and can be synthesized directly at room temperature. Compared with pure TiO2, Ag-modified TiO2 enhances the absorption of vi
Influence of Superplasticizer Type and Dosage on Early-age Drying Shrinkage of Cement Paste with Con
We introduced a parameter rs (the radius of the pores where the meniscus forms), which is composed of two factors, i e, water loss and cumulative pore size distribution (PSD), to provide a better explanation of the influence of superplasticizers(SPs) on e
Si/Cu3Si@C Composite Encapsulated in CNTs Network as High Performance Anode for Lithium Ion Batterie
Si/Cu3Si@C composites encapsulated in CNTs network (SCC-CNTs) were synthesized via the combination of ball-milling and CVD methods. SCC-CNTs consist of conductive Cu3Si, amorphous carbon layer, cross-linked CNTs, and the etched pores, which can play the s