论文部分内容阅读
该干燥机系统为我院自主研发且已大量推广应用的成熟产品,主干燥机料床由不同层数(1-6层)往复运行的不锈钢网带组成,由上到下网速逐层变慢且整体无级可调,被干物料由上到下逐层堆厚,并进行大量余热风循环利用,增加了干燥强度、提高了热利用率。热源风温按需设定后能自动恒温控制,可根据不同物料的工艺要求组合设定参数,以便干燥多种不同物料。可选配燃煤、油、天燃气等热源燃料。该机采用低温大风量干燥,能确保被干物料的质量,具有配套
The dryer system is our own research and development and has a large number of popularization and application of mature products, the main dryer bed by different layers (1-6 layer) reciprocating stainless steel mesh belt, from top to bottom speed of layer by layer changes Slow and the overall stepless adjustable by the dry material from top to bottom pile thick layer by layer, and a large number of waste heat recycling, increasing the drying intensity and improve the thermal efficiency. After the heat source air temperature is set according to need, it can be automatically thermostatically controlled. The parameters can be set according to the process requirements of different materials so as to dry a variety of different materials. Optional coal, oil, natural gas and other heat source of fuel. The machine uses low-temperature wind drying, to ensure that the quality of dry materials, with matching