论文部分内容阅读
A novel MEMS inertial sensor with enhanced sensing capacitors is developed.The designed fabricated process of the sensor is a deep RIE process,which can increase the mass of the seismic to reduce the mechanical noise,and the designed capacitance sensing method is changing the capacitance area,which can reduce the air damping between the sensing capacitor plates and reduce the requirement for the DRIE process precision,and reduce the electronic noise by increasing the sensing voltage to improve the resolution.The design and simulation are also verified by using the FEM tool ANSYS.The simulated results show that the transverse sensitivity of the sensor is approximately equal to zero.Finally,the fabricated process based on silicon-glass bonding and the preliminary test results of the device for testing grid capacitors and the novel inertial sensor are presented.The testing quality factor of the testing device based on the slide-film damping effect is 514,which shows that the enhanced capacitors can reduce mechanical noise.The preliminary testing result of the sensitivity is 0.492pf/g.
A novel MEMS inertial sensor with enhanced sensing capacitors is developed. The designed fabricated process of the sensor is a deep RIE process, which can increase the mass of the seismic to reduce the mechanical noise, and the designed capacitance sensing method is changing the capacitance area , which can reduce the air damping between the sensing capacitor plates and reduce the requirement for the DRIE process precision, and reduce the electronic noise by increasing the sensing voltage to improve the resolution. design and simulation are also verified by using the FEM tool ANSYS The simulated results show that the transverse sensitivity of the sensor is approximately equal to zero. Finally, the fabricated process based on silicon-glass bonding and the preliminary test results of the device for testing grid capacitors and the novel inertial sensor are presented. testing quality factor of the testing device based on the slide-film damping effect 514, which shows that the enhanced capa citors can reduce mechanical noise.The preliminary testing result of the sensitivity is 0.492pf / g.