论文部分内容阅读
故障１相机开机自检报Ｐ１１７错。故障分析与排除查故障代码Ｐ１１７提示为有关吸杯这一部分故障。移开输片机构面板 ,在自检时观察吸杯是否移动 ,发现吸杯无动作 ,怀疑吸杯带动电机故障 ,测供给电机电压的ＣＮ２３的第１４与第１５脚之间的电压为１２Ｖ ,正常。再看吸杯电机?
Fault 1 camera power self test P117 error. Failure analysis and troubleshooting The fault code P117 prompts us about this fault in the suction cup. Move the panel of the film-feeding mechanism to observe whether the suction cup is moving during the self-test. It is found that there is no action on the suction cup, and the suction cup is suspected to drive the motor failure. The voltage between the 14th and 15th feet of the CN23 supplied to the motor voltage is measured as 12V. normal. Look at the suction cup motor?