论文部分内容阅读
机械制造上所应用的錐度大体可以分成两类,一类为通用錐度(如莫氏和公制錐度),多用于各种工具和机床上,錐度多为1:20或接近1:20;另一类为专用錐度,用于各种不同产品制件上,錐度的大小依用途不同而不等。前一类錐度是标准化了的,后一类沒有統一的标准。 錐度結合件的质量用錐度量規检查最为經济可靠,效率也最高。用錐度量規做为錐度結合件的量值传递工具检查錐度制件,可以保証錐度結合件的尺寸准确一致,达到互換性要求。然而如何正确地保証这一量值的
The tapers used in machine construction can be broadly divided into two categories, general purpose tapers (eg, Morse and metric tapers), which are used on a wide range of tools and machine tools, with tapers being mostly 1:20 or close to 1:20 and the other Class for the special taper, for a variety of different products on the parts, taper size according to different purposes. The former type of taper is standardized, the latter type has no uniform standard. The quality of taper joint with taper gauge to check the most economical and reliable, the highest efficiency. Cone gauges as a taper combination of the amount of transmission tools to check the taper parts, you can ensure accurate taper joint size, to meet the interchangeability requirements. However, how to correctly guarantee this value