【摘 要】
：
Ultrasonic cutting with a disc cutter is an advanced machining method for the high-quality proces-sing of Nomex honeycomb core.The machining quality is influenced by ultrasonic cutting parameters,as well as tool orientations,which are determined by the mu
【机 构】
：
Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalia
论文部分内容阅读
Ultrasonic cutting with a disc cutter is an advanced machining method for the high-quality proces-sing of Nomex honeycomb core.The machining quality is influenced by ultrasonic cutting parameters,as well as tool orientations,which are determined by the multi-axis machining requirements and the angle control of the cutting system.However,in existing research,the effect of the disc cutter orientation on the machining quality has not been studied in depth,and practical guidance for the use of disc cutters is lacking.In this work,the inclined ultrasonic cutting process with a disc cutter was analyzed,and cutting experiments with different inclination angles were con-ducted.The theoretical residual height models of the honeycomb core,as a result of the lead and tilt angles,were established and verified with the results obtained by a linear laser displacement sensor.Research shows that the residual height of the honeycomb core,as a result of the tilt angle,is much larger than that as a result of the lead angle.Furthermore,the tearing of the cell wall on the machined surface was observed,and the effects of the ultrasonic vibration,lead angle,and tilt angle on the tear rate and tear length of the cell wall were studied.Experimental results revealed that ultrasonic vibration can effectively decrease the tearing of the cell wall and improve the machining quality.Changes in the tilt angle have less effect than changes in the lead angle on the tearing of the cell wall.The determination of inclination angles should consider the actual processing requirements for the residual height and the machining quality of the cell wall.This study investigates the influence of the inclination angles of a disc cutter on the machining quality of Nomex honeycomb core in ultrasonic cutting and provides guidelines for machining.
其他文献
Typical effects of coarse and fine aggregates on the long-term properties of sea sand recycled aggregate concrete (SSRAC) are analyzed by a series of axial compression tests.Two different types of fine (coarse) aggregates are considered:sea sand and river
摘要：随着我国经济的发展，同时促进了我国企业的发展。本文通过对我国企业建设中的党建建设的意义以及其如何促进其发展的措施进行分析，从而对于党政建设在企业发展中的重要作用进行了具体的分析和研究，期望能够为相关方面的研究提供理论性的参考。 关键词：党政建设；企业发展；重要作用 中图分类号：C29文献标识码： A 引言 党政思想是我们党在长期实践与发展中的经验总结，具有非常重要的意义与价值。任何行
Damage is defined as changes to the material and/or geometric properties of a structural system,comprising changes to the boundary conditions and system connectivity,adversely affecting the system\'s performance.Inspecting the elements of structures,par
The sliding forms of weak sloped and horizontal subgrades during the sliding process differ.In addition,the sliding form of weakly sloped subgrades exhibits considerable slippage and asymmetry.The accuracy of traditional slice methods for computing the st
Recent advances in nanotechnology have attracted significant attention to nanodiamonds (NDs) in both industrial and research areas thanks to their remarkable intrinsic properties:large specific area,poor cytotoxicity,chemical resistance,magnetic and optic
Beads free polyvinyl alcohol (PVA)/NiO nanofibers with an average diameter of 400 nm were successfully prepared through the electrospinning method.NiO nanograins were formed along the axis of the nanofiber due to the calcination of as-spun fibers for 24 h
摘要：市政工程施工中，由于管线相碰，造成一系列经济及社会问题，遵循市政管线综合规划设计原则，进行合理的专业规划设计，能带来良好的经济及社会效益. 关键词：市政工程管线规划设计 中图分类号： TU99 文献标识码： A 市政工程管线综合设计是市政工程设计的一项重要内容，随着城镇建设的发展，尤其是小区建设的兴起，道路下面敷设的管线越来越多，地下管线越来越拥挤.我们在施工现场经常遇到这样的情况：由
Magnesium phosphate cement (MPC) received increased attention in recent years,but MPC-based concrete is rarely reported.The micro-steel fibers (MSF) were added to MPC-based concrete to enhance its ductility due to the high brittleness in tensile and flexu
Crack growth modeling has always been one of the major challenges in fracture mechanics.Among all numerical methods,the extended finite element method (XFEM) has recently attracted much attention due to its ability to estimate the discontinuous deformatio
Retained backfill response to wall movement depends on factors that range from boundary conditions to the geometrical characteristic of individual particles.Hence,mechanical understanding of the problem warrants multi-scale analyses that investigate recip