论文部分内容阅读
1 制作模具1.1 底板:选一长条松木板,制作成长210cm、宽10cm、厚3cm的底板。底板上面沿中线凿一条宽1cm、深0.5cm的细槽,然后在细槽内粘一层0.5cm厚的海绵。1.2 下籽板:下籽板长210cm、宽3cm,厚0.5cm。距下籽板两端5cm处各打一圆孔,中间每间隔10cm打一圆孔,圆孔直径均为0.8cm。1.3 压板:压板长210cm、宽3cm、厚1cm。2 准备制作纸带的材料及种子2.1 纸条:选择有韧性的白纸,裁成
1 production mold 1.1 Floor: Select a long pine board, production growth 210cm, width 10cm, thickness 3cm floor. Chisel along the midline on the bottom of a wide 1cm, 0.5cm deep slot, and then stick a 0.5cm thick sponge in the slot. 1.2 under the seed plate: the seed plate length 210cm, width 3cm, thickness 0.5cm. From the seed plate at both ends of the 5cm at a round of playing a hole, the middle of every 10cm play a round hole, the hole diameter is 0.8cm. 1.3 Platen: Platen length 210cm, width 3cm, thickness 1cm. 2 ready to make the tape material and seeds 2.1 note: choose tough white paper, cut into pieces