论文部分内容阅读
由于家居装饰中电气水卫内容增多,容易出现问题,通过多年实践,我总结出一些易出差错的地方及其防治措施,现分述于下。一、电气方面(1)要选材合理,规格、型号、材质、性能应符合国家有关标准和工程设计要求;(2)配管时应严格控制管线弯曲半径及埋入深度,暗管保护层厚度应不小于15mm,重点控制踢脚线与地面结合处、圈梁
Because of the increase in the content of electric water and power in home decoration, it is prone to problems. Through many years of practice, I have summarized some areas that are prone to errors and their prevention and control measures, which are described below. I. Electrical aspects (1) Reasonable material selection, specification, model, material, and performance shall comply with the relevant national standards and engineering design requirements; (2) The pipe bending radius and buried depth shall be strictly controlled when piping, and the thickness of the protective layer of the dark pipe shall be Not less than 15mm, with emphasis on controlling the baseboard and ground joint