论文部分内容阅读
自动翻转吊钳,是在我车间李玉梅老技师的指导下,经过多次改进而制造成功的。经过使用性能良好。现简介如下:自动翻转吊钳主要是用在大型圆形锻件,如叶轮、冲孔锻件的翻转及钢锭、坯料顶锻的立起。同时也可作一般的大型锻件和钢锭的吊运工作。铸锻件直经在1200毫米以下,吊运量在6吨以下。其特点:一、钳子的张口和吊起能够自动,不须要操作者靠近炽热的锻件,只须指挥行车的动作即可达到要求,这样就大大的减轻了高温锻件对工人的威胁。其主要原理
Automatic flip tongs, in my workshop under the guidance of the old technician Li-Mei Li, after many improvements and manufacturing success. After the use of good performance. Now briefings are as follows: Automatic flip hanging clamp is mainly used in large round forgings, such as impeller, punching forgings and ingots, blank upset forging. At the same time can also be used for general large forgings and ingot lifting work. Casting and forging straight below 1200 mm, lifting volume of 6 tons below. Its features: First, the pliers opening and lifting can be automatic, without the operator near the hot forgings, only the command of traffic can meet the requirements of action, thus greatly reducing the high-temperature forgings on the worker’s threat. The main principle