论文部分内容阅读
一、球磨机出料锥体增加固定拉杆我矿用的φ1500×1500毫米格子型球磨机的出料锥体,一端系由出料格子板压住,另一端则由出料口的四个槽子卡住。但在运行中经过矿砂的磨损、出料锥体与格子板和与出料口串动,致使相互联接处的间隙逐渐加大。久之造成出料锥体松动,以至偏斜,使部分小钢球随矿浆一齐排出。这时只好停机检修,把磨损部位进行补焊,或排料锥体底部另加铁垫压紧。严重的甚至把出料口从另一方向开四个联
First, the mill out of the cone to increase the fixed rod mine mine φ1500 × 1500 mm grid ball mill cone, one end of the plaid pressed out by the discharge, the other end of the four slots from the outlet stuck . However, after running through the wear and tear of ore, the discharge cone and the grid plate and the discharge port string move, resulting in gradually increase the gap between the joints. For a long time caused by loose material cone, and even deflected, so that part of the small ball with the pulp together discharge. At this time had to shut down for maintenance, the wear parts for welding, or the bottom of the cone discharge plus pad compaction. Serious or even the spout from the other to open four joint