论文部分内容阅读
我队在使用IIIII-2型测斜仪测斜中,由于操作技术不熟练,经常发生线路不通,螺丝返扣松卸接头阻电或绝缘损坏等故障,这不仅直接影响了测斜工作的顺利进行,且由于地层松散,坍塌掉块,易导至陷埋和挤挟钻具事故.同时,由于仪器是通过电缆栓桥用接头与电缆连接一起的,且外边只用包布和胶布缠住,如遇阻力,并上强力拉起,就有拉断或脱扣的危险.为此,我们会用穿孔取粉管接手连接钻具去处理挤挟事故,获得成功.现将其处理经过和方法介绍如下:
My team in the use of IIIII-2 inclinometer inclinometer, due to unskilled operation, often lines are unreasonable, screws and loose connectors loose or damage to the insulation failure, which not only directly affect the smooth work of the inclinometer , And because of the loose stratum, collapses the block, easy to lead to the trap and squeeze the drill accident.At the same time, because the instrument is connected by a cable bolted joints with the cable, and the outside wrapped only with tape and tape , In case of resistance, and on the strong pull up, there is the danger of pulling off or tripping.To this end, we will use the powder to take over the hole to take over the connecting drill to deal with the Accident, the success of its treatment is now and The method is introduced as follows: