论文部分内容阅读
名称:稳压室;材料:08AL;批量:大批量;技术要求:1.各端面的沟痕,毛刺需在0.1以下;2.口部尺寸的不平齐高度差不得超过0.3。一、零件的工艺分析(一)材料上进行分析该拉深件所用材料为08AL,其抗拉强度为=325MPa是常用的优质碳素结构钢,具有较好的冲压性能,适于冲压生产。同时,08Al材料较软,是理想的冲压钢材,所以与机加工等加工方法相
Name: Regulator; Material: 08AL; Batch: high-volume; Technical requirements: 1. Groove of each end of the surface, burrs need to be less than 0.1; 2 mouth size unevenness height difference shall not exceed 0.3. First, the parts of the process analysis (A) the material for the analysis of the drawing materials used 08AL, the tensile strength = 325MPa is commonly used high-quality carbon structural steel, with better stamping performance, suitable for stamping production. At the same time, 08Al material is softer, is the ideal of stamping steel, so with machining and other processing methods