论文部分内容阅读
经过长期的摸索,我发现将盘子钩改成勺子钩,克服了集束式底钓钓组易埋入淤泥、饵钩分离和挂底的不足,使其所具有的优势得到充分发挥,效果很好。一、制作 1、铅坠。先将湿度合适的细沙放入碗内压平,用乒乓球在沙中压一直径30毫米、深8～9毫米的半圆锅底状坑,形成沙模。再备气门芯嘴的空心螺栓一只,在其顶端垫上与外径相等的金属圆片,拧上螺盖帽,使铅液不流入管内。用细铁丝将空心螺栓固定在沙模上方中心位置,使其垂直底面距锅底4毫米。灌上熔化的铅液,冷却后用螺盖帽固定在铅坠内,拧下空心螺栓,铅坠上方与螺盖帽成垂直锉平,下方磨成半圆体,直径26～28毫米,厚
After long-term exploration, I found that the plate hook into a spoon hook to overcome the bundled bottom fishing line easy to embed the mud, bait hook separation and the bottom of the lack of its advantages have been fully exerted, the effect is very good . First, making 1, plummet. The first appropriate fine sand into the bowl pressure flat, with a ping-pong in the sand pressure a diameter of 30 mm, deep 8 ~ 9 mm semicircular pot bottom pit, the formation of sand mold. Then prepare a hollow core valve bolt mouth, the top of the pad on the same diameter and the outer metal disc, screw cap, so that the liquid lead into the tube. Use a thin wire to secure the hollow bolt to the center of the sand mold so that its vertical bottom is 4 mm from the bottom of the pot. Poured molten lead solution, after cooling screw cap fixed in the lead plunge, unscrew the hollow bolt, lead plum and screw cap above the top of a vertical file, the lower ground into a semicircular body, a diameter of 26 to 28 mm, thickness