论文部分内容阅读
Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes. Differential interferometric synthetic aperture radar (DInSAR), mounted on an artificial sat-ellite, has the potential to be a cost-effective method for monitoring surface displacements over extensive areas, such as open-pit mines. DInSAR requires the ground surface elevation data in the process of its analysis as a digital elevation model (DEM). However, since the topography of the ground surface in open-pit mines changes largely due to excavations, measurement errors can occur due to insufficient information on the elevation of mining areas. In this paper, effect of different elevation models on the accuracy of the displacement monitoring results by DInSAR is investigated at a limestone quarry. In addition, validity of the DInSAR results using an appropriate DEM is examined by comparing them with the results obtained by global positioning system (GPS) monitoring conducted for three years at the same limestone quarry. It is found that the uncertainty of DEMs induces large errors in the displacement monitoring results if the baseline length of the satellites between the master and the slave data is longer than a few hundred meters. Comparing the monitoring results of DInSAR and GPS, the root mean square error (RMSE) of the discrepancy between the two sets of results is less than 10 mm if an appropriate DEM, considering the excavation processes, is used. It is proven that DInSAR can be applied for moni-toring the displacements of mine slopes with centimeter-level accuracy.