• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 期刊论文
  5. Influence of high magnetic field on as-cast structure of Cu-25wt.% Ag alloys

Influence of high magnetic field on as-cast structure of Cu-25wt.% Ag alloys

来源 :中国铸造：英文版 | 被引量 : 0次 | 上传用户：exia0654
【摘 要】
：
To investigate the influence of high magnetic field (HMF) on the solidification microstructure of Cu-25wt.%Ag alloy, the Cu-25wt.%Ag alloy was prepared under HM
【作 者】
：
Li Guimao Liu Yan Su Yan Wang 
【机 构】
：
YinfengFoundryCo.Ltd.,DepartmentofMechanicalEngineering,KeyLaboratoryofElectromagneticProcessingofMa
【出 处】
：
中国铸造：英文版
【发表日期】
：
2013年3期
【关键词】
：
铸造工艺 金属材料 热处理 钢材料 high magnetic field Cu-25wt.%Ag alloy Cu dendrite eutectic poi 
【基金项目】
：
This work was supported by the National High-Tech Research and Development Program of China （No. 2007AA03Z519）, the Talents Introduction and Discipline Innovation Program for Higher Education （No. B07
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
To investigate the influence of high magnetic field (HMF) on the solidification microstructure of Cu-25wt.%Ag alloy, the Cu-25wt.%Ag alloy was prepared under HMF of 12 T, and for comparison, the alloy solidified without HMF was also fabricated. Macro and
其他文献
Simulation study on three casting processes for a marine propeller hub body
The mold filling and solidification process of a marine propeller hub were simulated using ProCAST. Three casting processes–gravity casting, centrifugal cast
期刊
Refinement of primary Si grains of A390 alloy slurry through serpentine channel pouring process
In this paper, the serpentine channel pouring process for preparing a semi-solid A390 alloy slurry and refining the primary Si grains of the A390 alloy, was use
期刊
Effect of temperature field on solidification structure of pure Al under pulse magneto-oscillation
这篇文章在脉搏上讨论温度地的效果磁电机摆动(PMO ) 导致了纯 aluminiurn 的团结精炼为 PMO 团结技术的工业申请提供更多的信息。温度域主要被应用可变冷却条件和脉搏参数改
期刊
脉搏磁电机摆动(PMO)团结结构谷物精炼朱尔热pulse magneto-oscillation （PMO） solidification struc
Squeeze casting of aluminum alloy A380： Microstructure and tensile behavior
A380 alloy with a relatively thick cross-section of 25 mm was squeeze cast using a hydraulic press with an applied pressure of 90 MPa. Microstructure and tensil
期刊
Microstructure and wear resistance of highchromium cast iron containing niobium
In the paper, the effect of niobium addition on the microstructure, mechanical properties and wear resistance of high chromium cast iron has been studied. The r
期刊
highchromiumcastironsNbChardnessimpactTOUGHNESSwearresistancehigh chro
GPU based numerical simulation of core shooting process
核心射击过程是最广泛地使用的技术做沙核心，它在沙核心的质量起一个重要作用。尽管数字模拟能希望优化射击过程的核心，在射击过程的核心的数字模拟上研究很被限制。基于一个二
期刊
图形处理单位(GPU)计算统一设备建筑学(CUDA)并行化核心射击过程TP391.99一graphics processing unit （GP
Influence of annealing and spheroidizing treatment on microstructure and mechanical properties of AZ
The low-strength and high-brittleness of AZ91 cast magnesium alloy mainly result from the coarse divorced eutectic phase.To solve these problems,the annealing t
期刊
铸造工艺制模工艺精密铸造金属AZ91 magnesium alloy annealing spheroidizing β-Mg17AI12 phase
In-situ observation of porosity formation during directional solidification of Al-Si casting alloys
在原处，孔形成的观察被微焦点的 X 光检查成像使用在二 Al-Si 合金(7%Si 和 13%Si ) 的方向性的团结期间做。在两合金，小球形的毛孔开始远在 melt 形成离开最容易溶解稳固液体(
期刊
在原处观察孔形成扔合金的Al-Si微焦点的X光检查方向性的团结in-situ observation porosity formation Al
CHINA DIECASTING and CHINA NONFERROUS 2018 successfully concluded in Shanghai-An industrial event at
The 13th China International Diecasting Congress ＆ Exhibition（CHINA DIECASTING 2018） and 2018 China NonferrousAlloys ＆ Special Casting Exhibition （CHINA NONFERROUS20
期刊
CHINADIECASTINGCHINANONFERROUSShanghai-AnINDUSTRIALEVENTattractingGLOBAL
Modeling and analysis of porosity and compressive strength of gradient AI203-ZrO2 ceramic filter usi
BP neural network was used in this study to model the porosity and the compressive strength of a gradient Al2O3-ZrO2ceramic foam f ilter prepared by centrifugal
期刊
金属材料有色金属材料有色轻金属材料铝材料gradient Al203-ZrO2 ceramic foams centrifugal process pa