• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 期刊论文
  5. Squeeze casting of aluminum alloy A380： Microstructure and tensile behavior

Squeeze casting of aluminum alloy A380： Microstructure and tensile behavior

来源 :中国铸造：英文版 | 被引量 : 0次 | 上传用户：luoyanxiang
【摘 要】
：
A380 alloy with a relatively thick cross-section of 25 mm was squeeze cast using a hydraulic press with an applied pressure of 90 MPa. Microstructure and tensil
【作 者】
：
Li Fang Xue-zhi Zhang Bo-jun X 
【机 构】
：
DepartmentofMechanical,Ontario,FordPowertrainEngineeringResearch&,DevelopmentCentre
【出 处】
：
中国铸造：英文版
【发表日期】
：
2015年5期
【基金项目】
：
supported by the Natural Sciences and Engineering Research Council of Canada and the University of Windsor
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A380 alloy with a relatively thick cross-section of 25 mm was squeeze cast using a hydraulic press with an applied pressure of 90 MPa. Microstructure and tensile properties of the squeeze cast A380 were characterized and evaluated in comparison with the d
其他文献
Study on microstructure and properties of Mg-alloy surface alloying layer fabricated by EPC
AZ91D 表面 alloying 通过成为蒸气的模式扔被调查(EPC ) 技术。铝粉末(0.074 ～ 0.104 公里) 在实验被用作 alloying 元素。有优秀性质的 alloying 涂层被制作，它主要根据需要
期刊
表面合金化微观结构镁合金EPC表面性质合金制备扫描电子显微镜AZ91DEPC magnesium alloy surface alloying
Cellular automaton simulation of peritectic solidification of a C-Mn steel
A cellular automaton model has been developed to simulate the microstructure evolution of a C-Mn steel during the peritectic solidification. In the model, the t
期刊
元胞自动机模型凝固模拟C-MN钢凝固过程包晶共聚焦激光扫描显微镜生长动力学移动速度cellular automaton peritectic s
2-D boundary-fitted coordinate grid generation for casting with complex shape
In order to overcome the zigzag grids generated by conventional finite difference method on complicated casting boundaries in the simulation of casting process,
期刊
铸造工艺金属材料热处理钢材料complicated casting boundary-fitted grid STL 2-D region self-a
Blossoms in Southeast Asia to serve thousands of enterprises-METAL AP 2018 Successfully Held in Bang
Asia-Pacific Metal Industry Exhibition (METAL AP 2018)was successfully held in Bangkok International Trade and Exhibition Center (BITEC)on September 19-21,2018,
期刊
METALAPBangkokThailandASIA-PACIFICMETALIndustryExhibitionBITEC
Dry sliding wear of Ni alloyed austempered ductile iron
Measurements of dry sliding wear are presented for ductile irons with composition Fe-3.56C-2.67Si-0.25Mo-0.5Cu and Ni contents of 0.8 and 1.5 in wt.% with appli
期刊
Grain refining technique of AM60B alloy by Al-Ti-B master alloy
在 AM60B 镁合金的谷物尺寸上精制参数的谷物的效果作为更精制用 Al-5Ti-1B 主人合金被调查了；并且一种适当精制技术是结果显示的 developed.The Al-Ti-B 主人合金是为 AM60B
期刊
AM60B镁合金谷物精炼Al-Ti-B主人合金精制机制AM60B magnesium alloy grain refinement Al-Ti-B
Al-Si/Al2O3 in situ composite prepared by displacement reaction of CuO/Al system
Al2O3 增强粒子的 ZL109 合成被准备由在在 CuO 和艾尔之间的 situ 反应。微观结构借助于 OM， SEM 和 TEM 被观察。在尺寸在矩阵一致地散布的亚微米的 Al2O3 粒子，和 Cu 代替了
期刊
原位复合材料AL2O3反应合成CuO氧化铝颗粒ZL109复合材料制备拉伸强度aluminium matrix composites in sit
Simulation study on three casting processes for a marine propeller hub body
The mold filling and solidification process of a marine propeller hub were simulated using ProCAST. Three casting processes–gravity casting, centrifugal cast
期刊
Refinement of primary Si grains of A390 alloy slurry through serpentine channel pouring process
In this paper, the serpentine channel pouring process for preparing a semi-solid A390 alloy slurry and refining the primary Si grains of the A390 alloy, was use
期刊
Effect of temperature field on solidification structure of pure Al under pulse magneto-oscillation
这篇文章在脉搏上讨论温度地的效果磁电机摆动(PMO ) 导致了纯 aluminiurn 的团结精炼为 PMO 团结技术的工业申请提供更多的信息。温度域主要被应用可变冷却条件和脉搏参数改
期刊
脉搏磁电机摆动(PMO)团结结构谷物精炼朱尔热pulse magneto-oscillation （PMO） solidification struc