论文部分内容阅读
Surface engineering technology is a suitable method for coatings on the metal surfaces or performing surface modification treatment,which can improve corrosion resistance and biocompatibility of metals.In this research,corrosion behavior of Nb coating on H 2 SO 4 and HNO 3 treated AISI stainless steel 316L (SS) was evaluated.Nb coating was carried out using physical vapor deposition process on the SS.Characterization techniques including scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) technique were used to investigate the microstructure and morphology of the coated and treated SS.Electrochemical potentiodynamic tests were performed in two types of physiological solutions and compared with the pristine SS specimens.Cyclic polarization tests were performed to evaluate resistivity against pitting.Experimental results indicate that Nb coating and surface treatment of the SS had a positive effect on improvement of corrosion behavior.The decrease in corrosion current densities was significant for coated and treated specimens.The corrosion current density was much lower than the values obtained for pristine specimens.
Surface engineering technology is a suitable method for coatings on the metal surfaces or performing surface modification treatment, which can improve corrosion resistance and biocompatibility of metals. In this research, the corrosion behavior of Nb coating on H 2 SO 4 and HNO 3 treated AISI stainless steel 316L (SS) was evaluated. Nb coating was carried out using physical vapor deposition process on the SS. Characterization techniques including scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) technique were used to investigate the microstructure and morphology of the coated and treated SS. Electrochemical potentiodynamic tests were performed in two types of physiological solutions and compared with the pristine SS specimens. Cyclic polarization tests were carried to evaluate resistivity against pitting. Experimental results indicate that Nb coating and surface treatment of the SS had a positive effect on improvement of corrosion behavior. The decrease in corrosion current de nsities was significant for coated and treated specimens. The corrosion current density was much lower than the values obtained for pristine specimens.