论文部分内容阅读
High temperature stress rupture anisotropies of a second generation Ni-base single crystal(SC) superalloy specimens with [001], [011] and [111] orientations under 900 ℃/445 MPa and 1100 ℃/100 MPa have been investigated in the present study, with attentions to the evolution of γ/γ′ microstructure observed by scanning electron microscopy and the dislocation configuration characterized by transmission electron microscopy in each oriented specimen. At 1100 ℃/100 MPa as well as 900 ℃/445 MPa, the single crystal superalloy exhibits obvious stress rupture anisotropic behavior. The [001] oriented specimen has the longest rupture lifetime at 900 ℃/445 MPa, and the [111] oriented sample shows the best rupture strength at 1100 ℃/100 MPa. While the [011] oriented specimen presents the worst rupture lifetime at each testing condition, its stress rupture property at 1100 ℃/100 MPa is clearly improved, compared with900 ℃/445 MPa. The evident stress rupture anisotropy at 900 ℃/445 MPa is mainly attributed to the distinctive movement way of dislocations in each oriented sample. Whereas, at 1100 ℃/100 MPa, together with the individual dislocation configuration, the evolution of γ/γ′ microstructure in each orientation also plays a key role in the apparent stress rupture anisotropy.
High temperature stress rupture anisotropies of a second generation Ni-base single crystal (SC) superalloy specimens with [001], [011] and [111] orientations under 900 ° C / 445 MPa and 1100 ° C / 100 MPa have been investigated in the present study, with attentions to the evolution of γ / γ ’microstructure observed by scanning electron microscopy and the dislocation configuration characterized by transmission electron microscopy in each oriented specimen. At 1100 ° C / 100 MPa as well as 900 ° C / 445 MPa, the single crystal The [001] oriented specimen has a longest rupture lifetime at 900 ° C / 445 MPa, and the [111] oriented sample shows the best rupture strength at 1100 ° C / 100 MPa. oriented specimen presents the worst rupture lifetime at each testing condition, its stress rupture property at 1100 ° C / 100 MPa is clearly improved, compared with 900 ° C / 445 MPa. The evident stress rupture anisotropy at 900 ° C / 44 5 MPa is mainly attributed to the distinctive movement way of dislocations in each oriented sample. Whereas, at 1100 ° C / 100 MPa, together with the individual dislocation configuration, the evolution of γ / γ ’microstructure in each orientation also plays a key role in the apparent stress rupture anisotropy.