论文部分内容阅读
1974年我厂实现了中压造型流水线射流一电气步进程序自动控制,几年来生产证明,该系统简单,效果尚好,能适应流水线集中控制的要求,下面作简单介绍。一、程序和造型机全线有两对造型机组,22台单机,其平面布置见图1。砂箱内尺寸为800×600毫米,高分别为250/250和150/150毫米二种,所配备的连续式铸型输送器台面尺寸为 1000×650毫米,
In 1974, our factory realized the automatic control of the medium-pressure molding line jet-electric step-in process. The production has proved for several years that the system is simple and the effect is still good. It can adapt to the requirement of centralized control of the assembly line. Here is a brief introduction. First, the program and molding machine There are two pairs of modeling unit across the board, 22 stand-alone, the plane layout shown in Figure 1. The size of the flask is 800 × 600 mm and the height is 250/250 and 150/150 mm respectively. The continuous mold conveyor equipped with mesa size is 1000 × 650 mm,