论文部分内容阅读
流水线作业是现代化生产的重要标志。本文介绍一种简便、快速的生产流水线用换向装置。一、结构特点及使用方法在悬挂式输送线上,为了使输送线的生产能力及贮运能力提高,一个吊具上总是悬挂着相同的几个工件(如电冰箱外壳的喷粉线)。由此也就出现了两个问题:一是操作工在吊具上挂上(或取下)工件时,必须在吊具的几个方位进行操作,劳动强度大,生产效率低。二是不一定能满足生产工艺的要求。以冰箱厂的喷粉线为例,如图36所示:吊具上的D、B工件经
Pipeline operation is an important symbol of modern production. This article describes a simple and fast reversing device for production lines. First, the structural characteristics and methods of use In the hanging conveyor line, in order to make the production capacity of the transmission line and storage capacity increased, a spreader is always hanging on the same several pieces (such as the shell of the powder duster) . Thus there are two problems: First, the operator hanging on the spreader (or remove) the workpiece, the spreader must be operated in several directions, labor-intensive, low productivity. The second is not necessarily able to meet the requirements of the production process. To the powder factory in the refrigerator plant, for example, as shown in Figure 36: Sling on the D, B workpiece by