论文部分内容阅读
On the basis of the uniform design method,six kinds of martensitic hot work die steels were designed.The phase transformation temperatures including Ac1,Ac3,and Ms were measured by DIL805A quenching dilatometer.The influences of the main elements on phase transformation temperatures were analyzed by quadratic stepwise regression analysis,and three corresponding equations were obtained.These equations,in which the interactions of the elements were considered,showed more effectiveness than the traditional ones.In addition,the thermal expansion coefficients of these steels in annealed state and quenched state were also obtained during the tests.The influences of chemical composition and temperature on the thermal expansion coefficient were analyzed;the equations obtained were verified by using several kinds of steels.The predicted values were in accordance with the results of the experiments.
On the basis of the uniform design method, six kinds of martensitic hot work die steels were designed. The phase transformation temperatures include Ac1, Ac3, and Ms were measured by DIL805A quenching dilatometer. These influences of the main elements on phase transformation are temperatures by quadratic stepwise regression analysis, and three corresponding equations were obtained. These equations, in which the interactions of the elements were considered, showed more effectiveness than the traditional ones. In addition, the thermal expansion coefficients of these steels in annealed state and quenched state the also obtained obtained the test.The influences of chemical composition and temperature on the thermal expansion coefficient were analyzed; the equations obtained were verified by using several kinds of steels. the predicted values were in accordance with the results of the experiments.