论文部分内容阅读
工业建筑中比较高大复杂的火力发电厂主厂房,其墙体过去采用小块粘土砖砌筑,不能实现建筑工业化,不能适应电力建设迅速发展的迫切需要。 从1969年以来,东北地区的火电厂厂房,大量采用了4种类型的工业墙板,墙面面积共12万平方米,最大板长达12.8米,取得了较好的成效: 厂房围护结构自重一般可减轻50％～86％,厂房装配率提高20％～30％,加快了建设速度,改善了土建施工和设备安装交叉作业的条件(当大件设备安装就位后,能以较快速度封闭厂房)。采用墙板的电厂,其抗震性能一般比砖
In the industrial buildings, the tall and complex main buildings of thermal power plants have been built with small blocks of clay bricks in the past, which could not realize the industrialization of the buildings and cannot meet the urgent need for the rapid development of electric power construction. Since 1969, the thermal power plant buildings in the northeastern region have used 4 types of industrial wallboards in a large amount, with a wall area of 120,000 square meters and a maximum of 12.8 meters. This has achieved good results: Building envelope structure The weight can generally be reduced by 50% to 86%, the plant assembly rate can be increased by 20% to 30%, the construction speed can be accelerated, and the conditions for cross construction of civil construction and equipment installation can be improved (when large equipment is installed in place, it can be faster Speed closed plant). Power plants with wall panels generally have lower seismic performance than bricks