论文部分内容阅读
我公司为邢台某煤矿生产的两台170F减速器，其中四个低速级齿圈所采用钢种为公司自行开发的T．100沉淀硬化钢，各项指标均满足使用要求。下面就该种齿圈的热处理工艺过程及相关性能作一简要介绍。一、齿因技术条件齿图机械性能要求如表1所示。二、齿因工艺路线和毛坯生产1．工?
My company is Xingtai a coal mine production of two 170F reducer, of which four low-speed gear ring used by the company for the development of the company’s T. 100 precipitation hardened steel, the indicators are to meet the requirements. The following kind of ring gear heat treatment process and related performance for a brief introduction. First, due to technical conditions tooth gear mechanical performance requirements shown in Table 1. Second, the tooth due to technical routes and rough production 1. work?