论文部分内容阅读
如图所示,V形卡子1和槽形卡子2与挂钩5组合为一体。V形卡子1应保证对称于起吊重心线,共纵向长度要选择适当(按经常所吊重物长度),不宜过长。钢丝绳套3用一根钢丝绳把两端插接一起形成坏形套后,再穿进槽形卡子2里,这样制成的上套则用于吊钩起吊用。工作时,则用手将下套从欲吊重物的底面兜好后,套在挂钩5上,通过起重吊钩起吊即把钢丝绳套3拉紧捆好,同时借助定位V形卡子1抵住所吊重物,从而使重物自
As shown, the V-shaped clip 1 and the slot-shaped clip 2 and the hook 5 are combined into one. V-shaped clip 1 should be symmetrical to lift the center of gravity line, a total of vertical length to choose the appropriate (according to the length of the weight often hanging), should not be too long. Rope 3 with a wire rope to both ends of the plug together to form a bad set, and then into the slot-shaped clip 2, so made of the jacket is used for lifting the hook. Work, then hand under the sleeve from the bottom of the hoist to pocket a good, set in the hook 5, lifting by lifting the wire rope sleeve 3 bundle tension, at the same time by positioning the V-shaped clip 1 arrival Lifting heavy objects, so that heavy objects from