论文部分内容阅读
树桩的造型历来依靠修剪和吊扎。而对那些形态不理想、枝干较粗的桩坯,在修剪不宜,吊扎又困难时,可采用先剥皮,后用刀挖削的办法帮助整型。经笔者几年的实践,证明此法简便易行,效果良好。操作方法:视枝、干粗细程度而异,越粗剥皮越长,在欲弯曲处的内侧5—10厘米范围内,用利刀在其两端各斜切一个半圆,深达木质部,下刀角度为30°左右。而后,刀、手并用,撕去其中的树皮,宽度为直径的1/2,裸露的木质部呈长椭圆形。
Stump shapes have always depended on trimming and hanging. For those who are not ideal shape, the thick stems of the pile blank, pruning should not, hanging and difficult, you can use the first skin, after digging knife to help shape. After several years of practice by the author, this method proves that this method is simple and effective. Method of operation: Depending on the degree of branches and stems, the thicker the skin is, the longer the skin is peeled. Within 5-10 cm of the inner side to be bent, a semicircle is beveled at both ends with a knife to reach the xylem and the lower blade Angle of about 30 °. Then, the knife, hand and use, rip off one of the bark, the width of the diameter of 1/2, the exposed xylem was oval.