采用8031单片机的丝织机电控装置

• 作 者: 王旭光 陶安利 马宝甫
• 机 构: 山东矿业学院济南分院电气工程系,山东矿业学院济南分院电气工程系,山东矿业学院济南分院电气工程系,
• 出 处: 微计算机信息
• 发表日期: 1992年03期
• 关键词: 自动换梭 产品质量 径线 电控装置 静态测试 程序存储器 控制按钮 产量计算 掉电保护 光敏管

一、引言丝织机在工作时,为了保证产品质量和防止事故,一般要对其运行状况进行监测。监测的内容有以下几个方面:1.梭子的飞行速度要正常,否则会损坏径线。一旦发现梭子飞行不正常,应立即停机。这一功能称为“护经”。2.当由于某种原因,梭子发出的纬线断线时,应立即停机,这一功能称为“防缺纬”。3.经线张力过大也要停机。4.梭子中的纬线用完后应停机换梭或自动换梭。所以必须随时监测梭子中的纬

First, the introduction of silk machine at work, in order to ensure product quality and prevent accidents, generally to monitor their operating conditions. Monitoring the content of the following aspects: 1 shuttle speed to normal, otherwise it will damage the diameter. Once the shuttle is found to be abnormal, it should be shut down immediately. This function is called “Nursing.” 2. When for some reason the shuttles issued by the shuttle break, it should be shut down immediately. This function is called “anti-missing latitude”. 3. Warp tension too large to shut down. 4. The shuttle should be shut down after the latitude shuttle or shuttle automatically change the shuttle. Therefore we must always monitor the weft in the shuttle