论文部分内容阅读
我厂轴承保持器生产作业线,原来下料、成型和整形等工序的上下料,一直是手工操作,生产效率低,劳动强度大,安全系数小,同时对操作工人的熟练程度和技术水平要求较高,因而影响了产品质量的提高和生产潜力的发挥,并且时常发生事故。基于上述原因,我们设计了一种简易、实用的随动式接料装置。工作原理楔铁7固定在冲头上,随其上下运动。当冲头向下运动时,楔铁7与轴承6接触,使接料架5绕接料支杆3轴作转动,将冲裁件送出。当冲头上升时,
I plant bearing retainer production line, the original cutting, forming and shaping processes such as loading and unloading, has been a manual operation, low productivity, labor-intensive, safety factor is small, while the operating proficiency and technical requirements Higher, thus affecting the improvement of product quality and production potential, and frequent accidents. For the above reasons, we designed a simple, practical follow-type pick device. Working principle Wedge iron 7 fixed on the punch, with its up and down movement. When the punch moves downward, the wedge iron 7 is in contact with the bearing 6, so that the material feeding rack 5 rotates about the 3 axis of the connecting rod and sends out the blanking member. When the punch rises,