论文部分内容阅读
我们试制成功一种悬臂式外粉饰脚手架,受到工人的欢迎。悬臂式外粉饰脚手架构造及安装如下图所示。安装时,先将脚手架沿预先留好的脚手眼(120×60毫米)从内向外穿出,稍用力推紧,然后将立杆拉起插入端部的眼中,再将一40×60毫米的方木,放在立杆U形夹头内就安装完了。拆除时只需将方木拿掉,把立杆放倒落在槽铁的弹簧卡内,将整个脚手架推出即可。
We successfully manufactured a cantilevered external plaster scaffolding that was welcomed by workers. The construction and installation of cantilevered exterior decorative scaffold is shown in the figure below. When installing, first scaffold the scaffolding eye (120 x 60 mm) from the inside and out from the inside out, push harder, then pull up the pole and insert into the end of the eye, and then a 40 x 60 mm The square wood is installed in the pole U-shaped chuck. When removing, simply remove the square wood, place the poles down on the spring card of the slot iron, and push the entire scaffold.