论文部分内容阅读
在制造泥芯盒时,几乎都要用木銷釘来定位和合攏。过去我們做木銷釘是人工做的,非但質量不好,而且产量也不高。我厂木工車間丁炳正同志創造了泥芯盒銷釘快速切制法,这种切制法需要的装置如图所示。材料2是夹在电鑽1上,4是裝刀架,它借二个园柱螺釘5,将刀片3固定在它上面,在装刀架4的另一平面上,用园头螺釘6固定废锯条片7,它可以繞着园头螺釘6的中心回轉。切制时,先将工件2夹在电鑽上,然后开动电扭,使工件旋轉。将工件2放入早已調整好刀片的装刀架4的园孔中去,当銷釘切制完
In the manufacture of mud box, almost all wood pins to locate and close. In the past we do wood dowel is done by hand, not only the quality is not good, but the yield is not high. Ding Bingzheng carpentry workshop my comrades created a quick cut method of mud box box pin, this method of cutting the required equipment as shown. Material 2 is sandwiched between the drill 1, 4 is installed turret, which by two garden screws 5, the blade 3 is fixed on it, the other side of the turret 4 installed, with the head screws 6 fixed The disassembled saw blade 7 is pivotable about the center of the head screw 6. When cutting, the first workpiece 2 clip on the drill, and then start twisting, so that the workpiece rotation. The workpiece 2 has been adjusted into the blade has been adjusted to install the tool holder 4 hole, when the pin cut finished