论文部分内容阅读
为了弄清盘形钻头的破岩机理，了解不同结构参数盘形切削刃在破岩时的效果，特别是用盘形钻头钻中硬地层、软地层的钻井效果，对盘形牙轮钻头的９种不同结构参数（几何角度）的盘形切削齿与目前镶齿牙轮钻头上使用的瓢形和楔形齿在砂岩上进行了利切对比实验，并测量了不同牙齿在刮切过程中的刮切力和体积，对每颗牙齿在岩石上刮切下来的岩石体积采用填石蜡的方法进行测量。在实验过程中，通过计算机和数据采集器将整个实验数据完整地记录下来，并对所有实验数据进行统计分析，得到了不同结构牙齿在刮切重庆砂岩时的刮切效果，为设计出能实用于中软、软地层钻井用的盘形钻头提供了理论依据和实验数据。
In order to understand the rock breaking mechanism of the disc shaped bit, understand the effect of the disc shaped cutting edge with different structural parameters during rock breaking, especially the drilling effect of the hard formation and the soft formation by the disc shaped bit, Nine kinds of disc-shaped cutting teeth with different structural parameters (geometrical angles) were compared with the scoop-shaped and wedge-shaped teeth used in the current tricone roller bit on the sandstone, and the effects of different teeth on scraping Scraping force and volume, measured on each rock tooth scraping the rock volume using paraffin wax method. In the process of experiment, the whole experimental data was recorded completely by computer and data collector, and all the experimental data were statistically analyzed. The scraping effect of different structure teeth in scraping Chongqing sandstone was obtained. In order to design a practical and practical In the soft and soft formation of the drill bit used to provide a theoretical basis and experimental data.