【摘 要】
：
The Mg-Ni hydrogen storage alloys were prepared using the laser sintering technology.The effects of laser sintering power on the phase component and the weight
【机 构】
：
School of Materials Science and Engineering
论文部分内容阅读
The Mg-Ni hydrogen storage alloys were prepared using the laser sintering technology.The effects of laser sintering power on the phase component and the weight loss of Mg element for the Mg-Ni alloys were investigated.The samples P1,P2 and P3 consisted of five phases:Mg2Ni,MgNi2,Mg,Ni and MgO.The weight loss of Mg element remarkably increased at 1200 W.The addition of extra Mg significantly promoted the reaction between Mg and Ni.Mg2Ni,MgNi2,and a small amount of Ni and MgO phases were present in the samples PM (pestle milling) and BM (ball milling).The sample PM has a homogeneous microstructure,and the contents of Mg2Ni and MgNi2 were approximately consistent with those of the Mg-Ni alloy under the equilibrium conditions.The maximum hydrogen storage capacity of the sample BM was 1.72 wt.% and the sample can be activated easily at 573 K (only 3 activation cycles).
其他文献
Two thermomechanical coupled elastic-plastic finite element (FE) models were developed for predicting the 12-pass continuous rolling process of GCr15 rod and wi
The electrochemical behaviors of n-type silicon wafers in silica-based slurry were investigated, and the influences of the pH value and solid content of the slu
The cathode materials LiMn204 and rare earth elements La-doped or La and F dual-doped spinel lithium manganese oxides were synthesized by the citric acid-assist
In order to obtain a new precursor for LiFePO4, Fe2P2O7 with high purity was prepared through solid phase reaction at 650 ℃ using starting materials of FeC2O4
Current grid authentication frameworks are achieved by applying the standard SSL authentication protocol(SAP).The authentication process is very complicated,and
A new method for parameter optimization of pharmacokinetics based on an artificial immune network named PKAIN is proposed.To improve local searching ability of
The long afterglow phosphor CaAl2O4:Eu2+,Nd3+ was prepared by the high temperature solid-state reaction method,and the influence of La3+ and Dy3+ on the propert
The initial efficiency is a very important criterion for carbon anode material of Li-ion battery. The relationship between initial efficiency and structure para
A nonlinear mathematical model for the analysis of large deformation of frame structures with discontinuity conditions and initial displacements,subject to dyna
The hot deformation simulation of a ZK60 magnesium alloy at different temperatures from 373 to 673 K and different strain rates of 0.1, 0.01 and 0.002 s-1 was s