【摘 要】
：
Two thermomechanical coupled elastic-plastic finite element (FE) models were developed for predicting the 12-pass continuous rolling process of GCr15 rod and wi
【机 构】
：
School of Materials Science and Engineering,State Key Laboratory of Materials Modification by Laser,
【基金项目】
：
Excellent Youth and Science ＆ Technology Talent Foundation of Dalian;Dongbei Special Steel Group
论文部分内容阅读
Two thermomechanical coupled elastic-plastic finite element (FE) models were developed for predicting the 12-pass continuous rolling process of GCr15 rod and wire steel. The distances between stands in the proposed models were set according to the actual values, and the billets were shortened in the models to reduce the calculation time. To keep the continuity of simulation, a technique was developed to transfer temperature data between the meshes of different models in terms of nodal parameters by interpolation functions. The different process variables related to the rolling process, such as temperature, total equivalent plastic strain,equivalent plastic strain rate, and contact friction force, were analyzed. Also, the proposed models were applied to analyze the reason for the occurrence of an excessive spread in width. Meanwhile, it was also utilized to assess the influence of the roll diameter change on the simulated results such as temperature and rolling force. The simulated results of temperature are found to agree well with the measured results.
其他文献
Based on discussion on the theories of support vector machines(SVM),an one-step prediction model for time series prediction is presented,wherein the chaos theor
A new problem of degree-constrained Euclidean Steiner minimal tree is discussed,which is quite useful in several fields.Although it is slightly different from t
在对现有经典交通流元胞自动机模型进行总体分析的基础上,结合我国城市交通现状,重新标定了元胞长度和最大速度等参数,制定了车道转换规则,提出了公交车辆的减速入站和慢速启
Considering the instability of data transferred existing in high speed network.a near method is proposed for improving the stability using control theory.Under
Equal channel angular pressing (ECAP) is an effective thermo-mechanical process to make ultrafine grains.An investigation was carried out on the friction stir w
A practical catalytic method to oxidize α-ionone with molecular oxygen using N-hydroxyphthalimide(NHPI) combined with acetylaeetone cobatt(Ⅱ) (Co(acac)2) was
In the light of the localized progressive damage model, the evolution law of cohesive and frictional strength with irreversible strains was determined. Then, th
Fe-Cr-Mo-Ni-C-Co alloy was quenched in liquid nitrogen and held for 24 h. Hardness tester, OM, XRD, SEM were used to investigate the mechanical properties and m
The multivalued general mixed implicit equilibrium-like problems are introduced and studied.To solve these problems,a new predictor-corrector iterative algorith
Based on the problem that the service entity only has the partial field of vision in the network environment, a trust evolvement method of the macro self-organi