论文部分内容阅读
用途:为了加速电子元器件在高温高压条件下进行湿度试验的速度而设计成产品。它与温度为85℃、相对温度为85％的水气箱试验进行比较,可使试验时间缩短10倍。主要技术指标如下:有效容积:0.025m~3有效容积的外形尺寸:直径:370mm长度:450mm温度范围:不大于105～165℃相对湿度范围:65～100％过剩压力范围:0.2～4.0kg/cm~2允许偏差:温度:不大于±2℃相对湿度:不大于±3％剩余压力:不大于±3％到达规定状态所需时间:不大于100分钟电源(交流电):电压380伏频率:50赫相数:3相消耗功率:不大于4千瓦箱体尺寸:620×1670×1200毫米箱体重量:180公斤制造厂“伏尔加格勒电子机械制造厂
Uses: In order to speed up the temperature of electronic components under high temperature and pressure conditions for the humidity test designed into products. It is compared to a water tank test at a temperature of 85 ° C and a relative humidity of 85%, reducing the test time by a factor of 10. The main technical indicators are as follows: Effective volume: 0.025m ~ 3 Dimensions of effective volume: Diameter: 370mm Length: 450mm Temperature range: Not more than 105 ~ 165 ℃ Relative humidity range: 65 ~ 100% Excess pressure range: 0.2 ~ 4.0kg / cm ~ 2 Tolerance: Temperature: not more than ± 2 ℃ Relative humidity: not more than ± 3% Remaining pressure: not more than ± 3% Reach the specified state Time: not more than 100 minutes Power supply: AC 380V Frequency: 50 Hz Phase: 3 phase Power consumption: not more than 4 kilowatts Box size: 620 × 1670 × 1200 mm Box weight: 180 kg Manufacturing plant "Volgograd Electronic Machinery Factory