论文部分内容阅读
我们高举“鞍钢宪法”的旗帜,破除迷信,解放思想,群策群力,因陋就简,打破了“弹簧钢不能焊”的禁区,实现了焊修汽车弓子。三年来,共焊修了200多片解放牌汽车弓子,除满足了本队需要外,还支援了兄弟单位。汽车弓子焊修工艺: 一、准备工作1.下料:将废弓子片欲焊接的一端切成与边线成45°的斜边。注意留出余量,尽量把焊缝设在弓卡位置里面,每片弓子焊缝不能超过两处,尽量统筹安排,充分利用材料。2.磨口定长:将切口用砂轮修磨齐,焊口对齐后,要求弓片的边线成一直线,然后将
We hold high the banner of “Ansteel Constitution”, get rid of superstition, emancipate our minds and work hard together. Because of being simple, we broke the restricted area of “spring steel can not be welded,” and achieved welding and repairing car bows. In the past three years, a total of more than 200 pieces of Jiefangbei car bow have been repaired, in addition to meeting the needs of the team, they also support the fraternal units. Car bow welding repair process: First, the preparatory work 1. Blanking: The waste bow to the end of welding to cut into a 45 ° with the edge of the hypotenuse. Pay attention to allow the margin, try to put the weld inside the bow card position, each weld can not be more than two bow, try to make overall arrangements to make full use of materials. 2. Grinding mouth fixed length: The incision with grinding wheel alignment, welding alignment, bow line of the bow required a straight line, and then