论文部分内容阅读
我院机械工程研究所自动化研究室所承担的国家科委、一机部科研项目“微型计算机程序控制系统”,在一九八二年一月七日至九日湖北省工业局主持召开的鉴定会上得到好评.微型机程序控制系统(以下简称系统)采用价廉的M6800D_(11)单板机组成,其特点是:1>系统硬件设计采用多通道输入接口电路,输入输出点数较多,扩充方便,适合于控制具有顺序动作的机械设备.实现了硬件通用化,使研制生产周期缩短、成本降低.2>系统不仅满足了原THK-6370自动换刀数控卧式加工中心机床选刀、换刀、选速、台面选择等辅助机能控制的要求,而且在许多方面提高了技术性能.例如,根据微型机的特点,在国内首次实现了以软件为主的方法对刀库上的刀具进行管理,不需识刀器便能进行任意位置选刀,使选刀准确性大为提高,便于操作、监视;利用软件实现主电机起停时间的最佳控制,改善了电机使用条件;工作分
Laboratory of Automation Engineering, Institute of Mechanical Engineering, our commitment to the State Science and Technology Commission, a machine research project “microcomputer control system”, January 7, 1982 Hubei Province, Bureau of Industry held an appraisal At the meeting was praised.Microcomputer program control system (hereinafter referred to as the system) using inexpensive M6800D_ (11) single board machine, which is characterized by: 1> system hardware design using multi-channel input interface circuit, input and output points more, Easy to expand, suitable for the control of mechanical equipment with sequential action. To achieve a common hardware, development and production cycle shortening, cost reduction.2> The system not only meets the original THK-6370 automatic tool change CNC horizontal machining center machine tool selection, For example, according to the characteristics of the miniature machine, for the first time in China to achieve a software-based approach to the tool on the magazine Management, no knife can be Knife can choose any position knife, so that the accuracy of the election greatly improved, easy to operate, monitor; the use of software to achieve the best start and stop the control of the main motor, Good motor conditions; work points