一种试飞用新型传感器

来源 :国际航空 | 被引量 : 0次 | 上传用户:yediwuqiang
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
AERS-Midwest公司研制出一种简单的轻型压力传感器,监控流过飞机翼型的气流,可望用于飞行试验数据采集、机翼结冰探测、风切变报警和失速告警。 这种传感器称为机载升力分析系统(Sola)和空速与方向指示系统(Asdis),看来可用作飞行测试仪器。在飞机上可安装多达128个传感器来采集翼型在飞行中的性能。 Sola测量每个传感器处的实际升力,并可用来确定层流从机翼分离开来的时间和部位。Asdis除给出空速外还给出侧滑角。 AERS-Midwest has developed a simple lightweight pressure sensor that monitors airflow through the aircraft’s airfoils and is expected to be used for flight test data acquisition, wing icing detection, windshear alarms and stall alarms. Called the Sola and airspeed and direction indicator systems (Asdis), this sensor appears to be used as a flight test instrument. Up to 128 sensors can be installed on the aircraft to capture the performance of the airfoil in flight. Sola measures the actual lift at each sensor and can be used to determine when and where the laminar flow is separated from the wing. Asdis gives the side slip angle in addition to the space velocity.
其他文献
经多年实践、研究认为:保持中心干的优势、主枝小型化、以果控冠、及时更新等是整好苹果纺锤形的技术关键,并对其影响因子进行了分析讨论,最后提出了苹果纺锤形整形的三种模式。
采用泵机架实物作为试验模型进行动态测试,经信号采集与分析系统分析,得到机架的集总频响函数曲线,并识别出各阶模态参数。测试结果表明,装配后机架频响函数的最在幅值比空机架低
本文通过对单晶硅、多晶硅力敏元件复合结构的对比分析,及优化多晶生长条件的选择探讨研制高稳定的多晶力敏元件的理论根据 In this paper, by comparing the composite str
在试验处理范围的大田施氮量与烤烟产量显著正相关,密度与产量正相关;高氮水平下以较少留叶数具产量优势,低氮水平下适当多留叶具产量优势,现蕾或现蕾前打顶处理产量高于开花
会议
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.