小电机定转子冲片自动进料装置

• 机 构: 上海革新电机厂一车间,
• 出 处: 中小型电机技术情报
• 发表日期: 1974年02期
• 关键词: 定转子 料筒 滑块 进料装置 冲床 动作原理 连接板 向后 斜板 圆片

一、主要结构及动作原理: 开车前先将平整清洁的定转子圆片放入料筒(8),当冲床滑块向下运动时,斜板(11)也随之向下运动,将往复连杆(9)向后压推,迫使连接板(10)和滑块(7)向后移动,预送舌块(12)退至料筒(8)后,舌块(14)退至预送料筒(13)后。当冲床滑块向上运动时,往复连杆(9)向前推进,连接板(10)和滑块(7)也向前动作,预送舌块(12)将片料送至预送料筒(13),舌块(14)则将上次预送料筒内的冲片送入模内,完成送片动作。

First, the main structure and principle of action: Before driving a flat clean clean rotor discs into the barrel (8), when the punch slide down, the ramp (11) also will be down, will reciprocate The connecting rod 10 and the slider 7 are forced to move backward, the tongue 12 is retreated to the barrel 8, the tongue 14 is retreated to the pre- After feeding cylinder (13). When the punch slider moves upward, the reciprocating rod (9) advances forward, the connecting plate (10) and the slider (7) also move forward, and the pre-feed tongue block (12) feeds the pellet to the pre- 13), the tongue (14) will be the last pre-feed into the mold within the film cylinder to complete the film-feeding action.