论文部分内容阅读
SK101数控装置是天津电气传动设计研究所与北京第二机床厂合作为THK6380自动换刀镗铣厂配套而研制的。主机工作台1250毫米×800毫米,迥转工作台φ900带有40把刀具的刀库,有二个换刀机械手,能在加工过程中自动更换刀具。该机能完成镗孔、铣平面、钻孔、攻丝、锪平面等工序操作。这种机床适合加工多面箱体,工件装卡一次,全部工序连续加工完成,一般称为加工中心机床。我们在74年研制第一台SK101数控装置,现在己在北京第二机床厂试生产使用。该机与主机配套运行照片见图1,数控装置照片见图2。75年作了一些小的修改,进给速度从第一台2.5米/分提高到5米/分,天津电传所与北京二机床厂各生产了一台,现综合试制与生产情况简介如下。
SK101 CNC device is the Tianjin Electric Drive Design Institute and the Beijing No. 2 Machine Tool Plant for the THK6380 automatic tool boring and milling plant and development. Host workbench 1250 mm × 800 mm, turn table φ900 40 tool magazine, there are two tool change robots, can automatically change the tool in the process of processing. The machine can complete the boring, milling plane, drilling, tapping, 锪 plane operation procedures. This machine is suitable for processing multi-faceted box, workpiece loading card once, all the processes of continuous processing is completed, generally known as the machining center machine. We developed the first SK101 numerical control device in 74 years and now we have trial production in Beijing No.2 Machine Tool Plant. The aircraft and the host supporting the operation of photos shown in Figure 1, the numerical control device photos shown in Figure 2. 75 years made some minor changes, feed speed from the first 2.5 m / min increased to 5 m / min, Tianjin telex and Beijing Second Machine Tool Plant produced a Taiwan, is the trial and production of integrated briefings are as follows.