论文部分内容阅读
在液压件生产的全过程中(从毛坯到成品),每道工序后都有毛刺存在,只是随零件材质、切削量大小不同,形成不同形状和大小的毛刺而巳。即使是精加工后的零件上各部位也有小毛刺存在。它们给液压元件的质量带来严重的影响。所以能否有效的去除各种毛刺已成为保证液压件质量的当务之急。应把“光整工艺”作为液压件生产的基础工艺,成为必不可少的生产手段之一,再不能当做可有可无的“辅助工序”来对待了!
In the whole process of hydraulic parts production (from rough to finished products), burrs exist after each process, but with the material of the parts, cutting the amount of different sizes, the formation of different shapes and sizes of burrs and Pat. Even the finished parts have small burrs on all parts. They have a serious impact on the quality of hydraulic components. So can effectively remove a variety of burrs has become a hydraulic pressure to ensure the quality of the top priority. Should be “finishing process” as the basis for the production of hydraulic parts technology, an indispensable means of production, and can not be treated as an optional “auxiliary process” to treat it!