论文部分内容阅读
本文的摩托车防盗报警系统具有防盗性能强、可靠性好、误报率极低、耗电省等特点。对电路作适当的修改,也可用在防盗门等其它场合。本报警系统共由4个部分组成。一、电子锁锁体采用浇钢浇铸而成,体积62×40×30(mm),A面厚8mm,作安装固定用,如图1。电路图如图2。当无正确编码信号输入时,IC1的⑩、(17)脚低电平,Q6、Q5、Q2导通,马达反转,锁栓上升。当锁栓上升到位或者顶住物体时,弹簧压缩,K1断开,完成
This article motorcycle anti-theft alarm system with anti-theft performance, reliability, low false alarm rate, power consumption and other characteristics. Appropriate changes to the circuit can also be used in security doors and other occasions. The alarm system consists of 4 parts in total. First, the electronic lock body made of cast steel casting, the volume of 62 × 40 × 30 (mm), A surface thickness 8mm, for installation and use, as shown in Figure 1. Circuit diagram shown in Figure 2. When no correct coding signal is input, ⑩, (17) pin of IC1 is low level, Q6, Q5, Q2 turn on, the motor reverses and the latch rises. When the latch up or in place to withstand objects, the spring compression, K1 off, complete