波浪非线性对导管架平台疲劳寿命评估的影响

来源 :船舶工程 | 被引量 : 0次 | 上传用户:a753159456
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
基于线性和非线性波浪理论,在渤海海域观测的30种海况下,选取了导管架平台易发生疲劳损伤的几个危险节点作为研究对象,并通过确定性的疲劳分析方法对这些节点进行了疲劳寿命评估。结果表明,在选取的3种阻尼条件下,考虑波浪的非线性因素后,疲劳寿命的评估结果均有所增加,为海工结构的疲劳寿命评估提供了参考意见。 Based on the linear and nonlinear wave theory, under the 30 sea-states observed in the Bohai Sea, several dangerous nodes prone to fatigue damage on the jacket platform are selected as the research objects, and the nodes are subjected to fatigue through deterministic fatigue analysis Life assessment. The results show that the fatigue life assessment results are all increased under the selected three kinds of damping conditions considering the nonlinear factors of wave, which provide reference for the estimation of fatigue life of marine structures.
其他文献
急性脑梗死是威胁人们健康且发病率较高的常见疾病,是神经系统最为常见、致死率、致残率最高的疾病,严重影响着患者的生活质量.但是随着各地卒中中心的建立,超早期静脉溶栓的
  Polyimide materials such as microporous polyimide, have been used for CO2 adsorption by a physical method owing to the abundant nitrogen and oxygen atoms in
会议
  Mn1-xZnxFe2O4 (0≤x≤1, step:0.2) nano powders were fabricated by a template-assisted sol-gel method.The microstructure and magnetic properties of Mn1-xZnxF
会议
  Y(NO3)3·6H2O, Al(NO3)3·9H2O and isopropanol (C3H8O) were used as raw materials to synthesize YAG nanoparticles by sol-gel method while hexamethylenetetram
会议
质朴的文风、写实的精神是哈金小说创作的最突出的特点,也是哈金创作的自觉追求。本文意在通过他的短篇小说《作曲家和他的鹦鹉》,探讨哈金直白、清晰的叙述风格是如何形成的,并
  Semiconductor photocatalysis can be used to decompose various organic compounds in open air under aqueous conditions with solar energy.Bismuth tungstate (Bi
会议
  Series of Fe doped TiO2 samples was prepared by using nanometer titanium dioxide as raw material,ferric nitrate as Fe-doped source,and ammonia as precipitan
会议
利用光学传递矩阵和广义惠更斯-菲涅耳积分衍射公式,研究了阵列艾里光束在梯度折射率介质中的演化规律.首先,导出了傍轴近似下,空间域内艾里和阵列艾里光束通过光学系统的传
采用室温合成法制备出CsPbBr3钙钛矿量子点,并采用乙酸乙酯对量子点进行了一次、二次和三次清洗,以控制其表面配体密度.然后,利用合成并经过清洗的钙钛矿量子点制备了结构为I
设计了电子倍增层的多种表层结构,并模拟分析了表层掺杂分布对电子轰击型CMOS(EBCMOS)成像器件的电荷收集效率的影响.结合离子注入工艺优化设计电子倍增层表层结构,并利用离