【摘 要】
：
The influence of Nb content on the microstructure and cryogenic mechanical properties of a 7％Ni steel was investigated within the Nb content range from 0 to 0.05％. The microstructure was characterized by optical microscope, scanning electron microscope, t
【机 构】
：
School of Materials Science and Engineering, University of Science and Technology of China, Shenyang
论文部分内容阅读
The influence of Nb content on the microstructure and cryogenic mechanical properties of a 7％Ni steel was investigated within the Nb content range from 0 to 0.05％. The microstructure was characterized by optical microscope, scanning electron microscope, transmission electron microscopy and X-ray diffraction, and the low-temperature mechanical property tests were conducted. The Nb addition can effectively refine the prior austenite grains and microstructure of the steel. Fine niobium precipitates with a diameter of about 10-50 nm were observed. They tend to be spherical and locate mainly in the vicinity of grain boundaries. Although there are considerable amounts of reversed austenite forming at grain boundaries in the specimen containing the highest Nb content, no Nb element was detected in such reversed austenite, which implies that Nb element did not affect the formation of the reversed austenite directly. Mechanical test results suggest that the strength of the 7％Ni steel is not simply in relation to the prior austenite grain size, but also depends on the amount of reversed austenite. On the other hand, the grain refinement, enhanced with increasing Nb content, has a good effect on cryogenic toughness.
其他文献
Dynamic and static aging precipitation of Mg17Al12 phases in AZ80 magnesium alloy was studied by multidirectional forging (MDF) with decreasing temperatures from 410 to 300 ℃ and subsequent aging process.The results show that the morphology of the β-Mg17A
A quantitative phase field method of multi-component diffusion-controlled phase transformations coupled with the Kim-Kim-Suzuki model was applied to study the effect of initial particle size distribution (PSD) in 3D and space distribution in 2D on dissolu
This research article explains the removal of methylene blue (MB) and malachite green (MG) from aqueous solution using adsorption/photodegradation activity of ZnO∶Ag/bamboo charcoal (BC) nanocomposite.In addition,the antibacterial studies of the prepared
The hot deformation behavior of S460ML steel with different Nb contents was investigated by single-pass compression experiment on the Gleeble-1500 thermo-machine simulator at deformation temperatures ranging from 900 to 1200 ℃ and strain rates from 0.1 to
An Ag2O/Ag electrode was prepared through the electrochemical oxidation of sterling silver.This electrode was used as a cathodic electron acceptor in a microbial fuel cell (MFC).The Ag2O/Ag electrode was characterized by scanning electron microscopy,X-ray
The relationship between the tensile properties and δ (delta) phase precipitation in cast alloy IN625 was investigated in this paper.Although the influences of δ phase on the mechanical properties have been pointed out in our previous work,the relationshi
Based on equiatomic nickel and titanium,three kinds of NiTiFe alloys with a nominal chemical composition of Ni49Ti49Fe2,Ni48Ti48Fe4 and Ni47Ti47Fe6 (at.％),respectively,have been designed to investigate the influence of the addition of Fe element on phase
Copper matrix composites were prepared through spark plasma sintering (SPS) process,mixing fixed amount of reduced graphene oxide (rGO) with the different amounts of Cr.In the sintered bulk composites,the layered rGO network and uniform Cr particles distr
As-cast microstructure of a designed polycrystalline Ni3Al-based superalloy is characterized using optical microscope,scanning electron microscope,transmission electron microscope equipped with selected area diffraction system,and the intermetallic phase