【摘 要】
：
Based on equiatomic nickel and titanium,three kinds of NiTiFe alloys with a nominal chemical composition of Ni49Ti49Fe2,Ni48Ti48Fe4 and Ni47Ti47Fe6 (at.％),respectively,have been designed to investigate the influence of the addition of Fe element on phase
【机 构】
：
College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, Chin
论文部分内容阅读
Based on equiatomic nickel and titanium,three kinds of NiTiFe alloys with a nominal chemical composition of Ni49Ti49Fe2,Ni48Ti48Fe4 and Ni47Ti47Fe6 (at.％),respectively,have been designed to investigate the influence of the addition of Fe element on phase transformation,microstructure and mechanical property of equiatomic NiTi shape memory alloy.The microstructures of three kinds of NiTiFe alloys are characterized by the equiaxed grains instead of the dendrites.Consequently,some Ti2Ni precipitates are found to distribute in the grains interior and at the grain boundaries.The content of Fe element has an important influence on mechanical property of NiTiFe alloy.With increasing content of Fe element,the strength of NiTiFe alloy increases substantially,but the plasticity decreases sharply.It can be concluded that precipitation strengthening and solution strengthening play a significant role in enhancing the strength of NiTiFe alloy.In the case of three NiTiFe alloys,neither martensitic transformation nor reverse transformation can be observed in the range from-150 to 150 ℃.On the one hand,the phase transformation temperature is probably out of the scope of the present experimental temperature.On the other hand,the addition of Fe element probably suppresses first-order martensitic transformation or reverse transformation,and consequently the second-order-like phase transformation from an incommensurate stage to a commensurate stage can probably take place.
其他文献
0The effect of peak temperature (Tp) at 200,300,400,500 and 550 ℃ on the microstructural evolution and softening behavior of the simulated heat-affected zone (HAZ) was studied in the 2219-T87 alloy by electron-backscatter diffraction,transmission electron
The fly ash cenosphere/AZ91D composites were successfully prepared and isothermally heat-treated at different temperatures for different time. The effects of semi-solid isothermal heat treatment on the microstructures and damping capacities of fly ash cen
The effect of sample geometry aspect ratio (l/w) on the giant magnetoimpedance (GMI) in Fe67Co18Si11B4 amorphous ribbons was investigated systematically.The GMI profiles were measured as a function of the external magnetic field at different frequencies u
A modified FGH96 superalloy using 0.1 wt％ graphene was successfully prepared using the wet mixing method.The interfacial bonding mechanism between the graphene and the superalloy matrix was characterized using optical microscope,scanning electronic micros
Dynamic and static aging precipitation of Mg17Al12 phases in AZ80 magnesium alloy was studied by multidirectional forging (MDF) with decreasing temperatures from 410 to 300 ℃ and subsequent aging process.The results show that the morphology of the β-Mg17A
A quantitative phase field method of multi-component diffusion-controlled phase transformations coupled with the Kim-Kim-Suzuki model was applied to study the effect of initial particle size distribution (PSD) in 3D and space distribution in 2D on dissolu
This research article explains the removal of methylene blue (MB) and malachite green (MG) from aqueous solution using adsorption/photodegradation activity of ZnO∶Ag/bamboo charcoal (BC) nanocomposite.In addition,the antibacterial studies of the prepared
The hot deformation behavior of S460ML steel with different Nb contents was investigated by single-pass compression experiment on the Gleeble-1500 thermo-machine simulator at deformation temperatures ranging from 900 to 1200 ℃ and strain rates from 0.1 to
An Ag2O/Ag electrode was prepared through the electrochemical oxidation of sterling silver.This electrode was used as a cathodic electron acceptor in a microbial fuel cell (MFC).The Ag2O/Ag electrode was characterized by scanning electron microscopy,X-ray
The relationship between the tensile properties and δ (delta) phase precipitation in cast alloy IN625 was investigated in this paper.Although the influences of δ phase on the mechanical properties have been pointed out in our previous work,the relationshi