论文部分内容阅读
在车床上车制多台或多槽的工件(特别是较长的工件)时,使用我厂郭芝宝同志改进的记号测量尺,来测量每个台的长度或槽的距离是非常方便的。记号测量尺的结构如附图,图中1是测量尺,左端固定在车头上。2是指针座,固定在大拖板上,随着刀架一起左右移动。3是固定指针,和弹簧夹子4焊成一体,可按需要多准备几个,分别夹在测量尺的一定位置上,作为测量长度的标准。5是活动指针,焊在指针座2上。加工时,当指针5对准了指针3,这段加工就完成了,应该退刀。这样,就可以不用尺来测量长度,既方便又
It is very convenient to measure the length of each station or the distance of the trough by using the mark measuring ruler improved by our factory comrade Guo Zhibao while lathe machining multiple or multi-slot workpieces (especially long workpieces). Marker measuring scale structure as shown in the figure, the figure is a measuring ruler, the left end fixed to the front. 2 is the pointer seat, fixed on the big carriage, with the turret left and right together. 3 is a fixed pointer, and spring clip 4 welded into one, according to the need to prepare a few more, were caught in the measuring ruler a certain position, as the measurement of the length of the standard. 5 is the activity pointer, welded on the pointer seat 2. When processing, when the pointer 5 is aligned with the pointer 3, the processing is completed, it should be back. In this way, it is easy and convenient to measure the length without using a ruler