论文部分内容阅读
Aluminum diffusion coatings are often prepared by a pack aluminization technique, which is a specific variety of chemical vapor deposition (CVD) method. The coating process takes place in a bed containing a mixed powder that serves as a source of the coatings forming element. The phase composition of the diffusion layer obtained depends on the activity of the Al during the pack aluminization processing. In this work, the proportion of Al to special additive powder in the pack and the treatment temperature are adjusted to achieve the desired surface composition of aluminized layer. The aluminized 20 plain carbon steel and HK40 austenitic steel were investigated by optical microscopy (OM) , X-ray diffraction (XRD) and microsclerometer. The results showed that the desired FeAl, Fe3Al and NiAl were respectively formed on the 20 plain carbon steel and HK40 austenitic steel, and the aluminides FeAl3, Fe2Al5 or Ni2Al3, NiAl3 could be inhibited.
Aluminum diffusion coatings are often prepared by a pack aluminization technique, which is a specific variety of chemical vapor deposition (CVD) method. The coating process takes place in a bed containing a mixed powder that serves as a source of the coating forming element. The phase composition of the diffusion layer will depend on the activity of the Al during the pack aluminization processing. In this work, the proportion of Al to special additive powder in the pack and the treatment temperature are adjusted to achieve the desired surface composition of aluminized layer The aluminized 20 plain carbon steel and HK40 austenitic steel were investigated by optical microscopy (OM), X-ray diffraction (XRD) and microsclerometer. The results showed that the desired FeAl, Fe3Al and NiAl were formed on the 20 plain carbon steel and HK40 austenitic steel, and the aluminides FeAl3, Fe2Al5 or Ni2Al3, NiAl3 could be inhibited.