论文部分内容阅读
此离合器装在4115T、4115TD机型上,并与铁牛—55拖拉机配套使用,为双作用常压式。一、使用注意事项 1.在使用中,要定期注入2号钙基润滑脂润滑分离轴承和前后轴承; 2.摩擦片不得沾有油污,以免打滑; 3.离合器不得处于半接合、半分离状态进行工作。接合时应平顺,分离要迅速彻底,以免减少摩擦片的磨损。二、离合器的调整 1.拆下离合器壳侧前方调整孔盖,在离合器接合状态下,取出带槽螺母40上的开口销,旋转该螺母,保证杠杆50与分离轴承
This clutch mounted on the 4115T, 4115TD models, and supporting the use of tractor-tractor -55 double-acting atmospheric pressure. First, the use of Notes 1. In use, to be regularly injected into the No. 2 calcium-based grease lubrication bearings and bearings before and after; 2. Friction plate may not be stained with oil to avoid slipping; 3. Clutch shall not be semi-jointed, semi-detached state working. Bonding should be smooth, separated quickly and thoroughly, so as not to reduce the friction plate wear. Second, the clutch adjustment 1. Remove the front side of the clutch housing adjustment hole cover, clutch engagement state, remove the slotted nut 40 on the open pin, rotate the nut to ensure that the lever 50 and separate bearings